Dopo le ultime verifiche di collegamento ottengo questo:
[ciupy@ciupy-pc ~]$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
could not open USB device 0x148f/0x3070 at 001:003: Access denied (insufficient permissions)
found USB scanner (vendor=0x04b8 [EPSON], product=0x0121 [EPSON Scanner]) at libusb:001:002
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 002:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
Sembra che adesso lo scanner sia riconosciuto, poi ho fatto scanimage -L con il seguente risultato:
device `snapscan:libusb:001:002' is a EPSON EPSON Scanner flatbed scanner
device `epkowa:usb:001:002' is a Epson (unknown model) flatbed scanner
Ma quando lancio skalite, non riesce a trovare nulla, di seguito il risultato:
[ciupy@ciupy-pc ~]$ sudo skanlite
[sudo] password di ciupy:
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
"deviceOption value="
("image/bmp", "image/jpeg", "image/png", "image/vnd.microsoft.icon", "image/x-portable-bitmap", "image/x-portable-graymap", "image/x-portable-pixmap", "image/x-xbitmap", "image/x-xpixmap")
"epkowa:usb:001:002"
"epkowa:usb:001:002"
sane_open(" "epkowa:usb:001:002" ", &handle) failed! status = Device busy
Di seguito il contenuto di dll.conf:
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
#hpaio
Ed il listato di epson2.conf:
# epson2.conf
#
# here are some examples for how to configure the EPSON2 backend
# SCSI
scsi EPSON
# for the GT-6500:
#scsi "EPSON SC"
# Parallel port
#pio 0x278
#pio 0x378
#pio 0x3BC
# USB
usb 0x4b8 0x121
# For libusb support for unknown scanners use the following command
# usb <vendor ID> <product ID>
# e.g.:
# usb 0x4b8 0x121
# usb 0x148f 0x3070
# Network
#
# net 192.168.1.123
net autodiscovery
net 192.168.1.106
Qualche idea su che cosa posso fare o che ho sbagliato?
Grazie